Fuse, Fascia Mount with Digital Output

  • Provides low-cost block protection. Use instead of finicky DCC circuit breakers.
  • Can be set trip levels of 1.8, 1.4, 1.1 and 0.6 Amperes.
  • Isolates problems so that a short circuit in one area does not cause operations to halt elsewhere.
  • Convenient fascia mounting with the drilling of two holes.
  • In most cases will automatically reset when short circuit is removed. Sound equipped locomotives may require manual reset with the switch shown.
  • LED indicates that fuse is active.
  • Can be interfaced to an alarm or to signal circuitry.
  • Remains in a protected state until current flowing to the track ends.
  • Compatible with DCC, AC and DC circuits of 30 Volts or less.

System compatibility:

A minimum 2.5 Ampere capacity is recommended for the DCC command station and track power supply.

Digitrax Zephyr systems: In general the Zephyr systems have a very fast short circuit protection built in and this product has failed to trip fast enough in some versions of the Zephyr systems.

NCE 524025 Power Cab Starter Set: The Starter Set trips faster than this product and therefore this product provides no added protection.

Lenz LZV100 also seems to be incompatible.
Click here to download instructions.
Blocks are $8.95 each, or $34.95 for a package of 5 blocks.

Order

Facia Mount Fuse Board
0.0 rating based on 12,345 ratings
Overall rating: 0 out of 5 based on 0 reviews.


Add your review here:
Name
Email
Review Title
Rating
Review Content

* U.S.A. Shipping is $5, Canada 9.95 USD, otherwise 14.95 USD