These are 3D printed kits. Finishing the kits will require sanding, some assembly and paint.
This model is based on drawings made in 1980 of a water tower at the John Krohn Ranch in San Martin, California. Virtually every orchard and vineyard farm house in California and possibly elsewhere included a water tower primarily for domestic use so that the house had running (pressurized) water. Most farms converted to smaller tanks and then eventually to in ground pumps. Many of the towers remain although likely non or them are currently used for water storage. I lived in one of these farm houses in the late sixties. I had an above ground pump with a 50 gallon tank next to it. The house was a bungalow style which was also very typical. We used the water tower for tools on the ground floor and attached our TV antenna higher up on the side. I think the tank was still inside but never got to go up and explore as we were only renting. The prototype for this tower had a wind mill but that was not at all common as these houses had electricity both for the house as well as for the irrigation systems. Lots and lots of water was needed for the orchard or vineyard and these towers would not hold enough water for that purpose.
You will need to add roofing and paint to complete the model. $24.95 + Shipping
Add your review here: